德国巴斯夫ASA/64BK注塑级高流动耐高温高耐热防火-东莞市顺盈塑胶有限公司

uran SC KR2864C 简介：

Properties of Luran S KR2864C

温馨提示：因塑料价格有小波动，页面上的报价与当天的实际报价可能有所差异，页面报价仅供参考。因工作太忙未能及时更新报价，还望谅解!如须了解塑料行情还请旺旺联系或电话直询。电话：.VX：.扣扣：312811175.

Luran S KR2864C is a blend of ASA and PC offering high heat resistance, good impact strength and enhanced flowability

Luran SC KR2864C 色号：

Luran S KR2864C NRShow

Luran S KR2864C BK89828Show

Luran S KR2864C SPLShow

Luran S KR2864C UV N

Luran SC KR2864C 物性表：

Luran SC KR2861/1C High heat resistance，High impact strength，高耐热，高抗冲击。

Luran SC KR2863C Highest heat resistance，High impact strength，超高耐热，高抗冲击。

Luran SC KR2864C High flow ability，High heat resistance，高耐热，流动性好。

Luran SC KR2866C Good heat resistance，Medium impact strength，耐热性好，中等抗冲击强度。

Luran SC KR2867CWU Highest flowability，V0 classification，防火V-0级，高流动。

Property, Test ConditionStandardUnitValues

Rheological Properties
Melt Volume Rate 220 °C/10 kg	ISO 1133	cm3/10 min	10
Melt Volume Rate, 260 °C/5 kg	ISO 1133	cm3/10 min	25
Mechanical Properties
Izod Notched Impact Strength, 23 °C	ISO 180/A	kJ/m2	60
Izod Notched Impact Strength, -30 °C	ISO 180/A	kJ/m2	8
Charpy Notched Impact Strength, 23° C	ISO 179	kJ/m2	55
Charpy Notched Impact Strength, -30° C	ISO 179	kJ/m2	11
Tensile Stress at Yield, 23° C	ISO 527	MPa	63
Tensile Strain at Yield, 23° C	ISO 527	%	4.6
Tensile Modulus	ISO 527	MPa	2600
Elongation at Break (MD)		%	50
Flexural Strength	ISO 178	MPa	100
Hardness, Ball Indentation	ISO 2039-1	MPa	110
Thermal Properties
Vicat Softening Temperature VST/B/50 (50°C/h, 50N)	ISO 306	°C	120
Vicat Softening Temperature, VST/A/50 (50°C/h, 10N)	ISO 306	°C	134
Heat Deflection Temperature A; (annealed, 1.8 MPa)	ISO 75	°C	105
Heat Deflection Temperature B; (annealed, 0.45 MPa)	ISO 75	°C	124
Coefficient of Linear Thermal Expansion	ISO 11359	10^(-6)/°C	70 - 90
Thermal Conductivity	DIN 52612-1	W/(m K)	0.17
Electrical Properties
Dielectric Constant (100 Hz)	IEC 60250	-	3.1
Dissipation Factor (100 Hz)	IEC 60250	-	60
Dissipation Factor (1 MHz)	IEC 60250	-	120
Volume Resistivity	IEC 60093	Ohmm	1E12
Surface Resistivity	IEC 60093	Ohm	1e 013
Other Properties
Density	ISO 1183	kg/m3	1150
Water Absorption, Saturated at 23°C	ISO 62	%	0.6
Moisture Absorption, Equilibrium 23°C/50% RH	ISO 62	%	0.18
Processing
Linear Mold Shrinkage	ISO 294-4	%	0.5 - 0.9
Melt Temperature Range	ISO 294	°C	260 - 300
Mold Temperature Range	ISO 294	°C	80
Injection Velocity	ISO 294	mm/s	200
Drying Temperature		°C	100 - 110
Drying Time		h	2 - 4

主要供应的德国巴斯夫ASA/PC型号：